Model

Specification

S-250-5

S-250-7.5

S-250-12

S-250-15

S-250-24

S-201-48

DC output voltage

5V

7.5V

12V

15V

24V

48V

Output voltage error (Note2)

±2%

±1%

±1%

±1%

±1%

±1%

Rated output current

40A

30A

20A

16.6A

10A

5.2A

Output current rage

0-40A

0-30A

0-20A

0-16.6A

0-10A

0-5.2A

Wave and noise(Note3)

150mVp-p

200mVp-p

150mV

150mV

180mV

240mV

Inlet stability(Note4)

±0.5%

±0.5%

±0.3%

±0.3%

±0.2%

±0.2%

Load stability(Note5)

±0.5%

±0.5%

±0.3%

±0.3%

±0.2%

±0.2%

DC output power

200W

225W

216W

225W

240W

240W

Efficiency

73%

76%

79%

80%

81%

83%

Adjustable range for DC voltage

4.5-5.6V

6-9V

10-14V

12-18V

20-28V

41-56V

AC input voltage range

85-132VAC/176-264VAC SELECTED BY SWTCH 47-63Hz;255-370VDC

Input current

5A/115V 2.5A/230V

AC impulse current

Cold-start current 25A/115V 50A/230V

Leakage current

<3.5mA/240VAC

Overload protection

105%-150 %TypePULSING HICCUP SHUTDOWN Reset: auto recovery

Over-voltage protection

115%-135%

Temperature coefficient

±0.03%(050)

Setup rise hold up time

200ms,100ms,20ms

Vibration

10-500Hz,2G 10min./1cycle,Period for 60min,Each axes

Withstand voltage

Input and output interval3KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC

Isolation resistance

Input and output interval,Input and enclosure,Output and enclosure500VAC/100M Ohms

Working temperature and humidity

-10+60,20%90%RH

Store temperature and humidity

-20+85,10%95RH

Overall dimension

215*115*50mm

Weight

0.9Kgs

Safety standards

Meet UL1012,TUV EN60950 Approved

EMC standards

Meet CLSPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification

Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2311must be knocked down.